Characterization of bondline thickness effects in adhesive joints

dc.contributor.authorTomblin, John S.
dc.contributor.authorHarter, P.
dc.contributor.authorSeneviratne, Waruna P.
dc.contributor.authorYang, Chihdar Charles
dc.date.accessioned2019-03-08T22:07:03Z
dc.date.available2019-03-08T22:07:03Z
dc.date.issued2002-04
dc.descriptionClick on the DOI link to access the article (may not be free).
dc.description.abstractGrowing application of composite materials in air-frame structures tends to make significant use of bonded constructions. Despite the large work that has been done on adhesive characterization over previous years, various certification-related issues arise in these applications. The available test methods for determining the in situ properties of an adhesive joint for use in the design must be clarified for thick bondlines, where there is a lack of readily available data. Results from three test methods indicated a decrease in the apparent shear strength as the bondline thickness was increased. The apparent shear strength given by the test methods investigated was found to be highly dependent on the adherend bending stiffness, which directly effects the peel stress distributions in the adhesive layer. In the adhesive strength comparisons as a function of test method, it was found that the thin-adherend tests gave different comparative results than the thick-adherend tests, which were primarily a function of the high peel stresses in the thin-adherend joints. This combined state of stress does not give a tree view of the apparent shear stress of the adhesive, but rather an indication of the adhesive behavior under this type of combined loading. It is recommended that thickadherends be used when comparing different adhesive systems for apparent shear strength, and that thin adherends should be used for qualitative tests only.
dc.identifier.citationTomblin, J., Harter, P., Seneviratne, W., & Yang, C. (2002). Characterization of bondline thickness effects in adhesive joints. Journal of Composites Technology and Research, 24(2), 332-344.
dc.identifier.issn0884-6804
dc.identifier.urihttp://dx.doi.org/10.1520/CTR10562J
dc.identifier.urihttp://hdl.handle.net/10057/15870
dc.language.isoen_US
dc.publisherAmerican Society for Testing and Materials
dc.relation.ispartofseriesJournal of Composites Technology and Research
dc.relation.ispartofseriesv. 24 no. 2
dc.rights.holderCopyright 2002 American Society for Testing and Materials
dc.subjectAdhesive joints
dc.subjectBondline thickness
dc.subjectComposite materials
dc.subjectShear strength
dc.subjectShear stress
dc.subjectStiffness
dc.subjectStress concentration
dc.titleCharacterization of bondline thickness effects in adhesive joints
dc.typeArticle
Files