3 dimensional characterizations of the impact damaged fiber reinforced composites

No Thumbnail Available
Issue Date
2013-11-15
Authors
Salagame, Raghavendra
Patlolla, Vamsidhar Reddy
Asmatulu, Ramazan
Advisor
Citation

Salagame, Raghavendra; Patlolla, Vamsidhar Reddy; Asmatulu, Ramazan. 2013. 3 dimensional characterizations of the impact damaged fiber reinforced composites. ASME 2013 International Mechanical Engineering Congress and Exposition, vol. 1: Advances in Aerodynamics San Diego, California, USA, November 15–21, 2013

Abstract

Impact damages on the composites need to be understood thoroughly for the designing, manufacturing and repairing of the aircraft composite parts. Larger diameter of the impactor can create a shallow dent on the outside, but a significant damage on the inside of the composites. Larger impact dents can be easily detected during the regular visual inspection, while the smaller dents with significant internal damages cannot be detected which may compromise the structure resulting in safety concerns for the composite aircraft. 3D characterization of impact damages on glass, carbon, and Kevlar fibers reinforced composite structures may be necessary to better understand the material behavior and provide better designs. In the present study, Kevlar fiber composite panels were prepared using a wet layup in a vacuum curing oven while the glass and carbon weave material composite panels were fabricated using pre-preg and cured in the autoclave. These composite panels were impacted with 3 different tup diameters and 2 different energy levels. Impact load was measured using a load cell and the velocity was detected using a velocity detector. The impacted composite panels were then subjected to the non-destructive inspection (NDI) tests, and their 3D structural damages were evaluated in detail. The test results showed that the shallow dent impacts created significantly deeper and bigger internal damages on the structure of the composites. In addition to that, the impact damages on the composites were dependent on the composite types and structures, which may be critical for the design, manufacture and repair of different aircraft composites.

Table of Content
Description
Click on the DOI link to access the article (may not be free).
publication.page.dc.relation.uri