Effect of variation of link lengths and stiffness on the gearing ratio of a four bar mechanism with application to aircraft trim tabs

dc.contributor.authorDessalegn, Abey
dc.contributor.authorYihun, Yimesker S.
dc.contributor.authorFlores, Paulo
dc.contributor.authorLankarani, Hamid M.
dc.date.accessioned2016-08-18T20:48:48Z
dc.date.available2016-08-18T20:48:48Z
dc.date.issued2016
dc.descriptionClick on the DOI link to access the article (may not be free).en_US
dc.description.abstractKinematic chains or mechanisms have conventionally been analyzed comprising of links that behave as rigid members and links assumed to be built at nominal sizes. Such mechanisms, articulating entirely from rigid-body translations and/or rotations and nominally established links may not closely represent the actual real life manufactured parts with tolerances and joint clearances. It is important to identify the allowable variations in the linkages especially when the end-effector of the mechanism generates a path or a function and/or a tightly controlled gearing ratio or mechanical advantage is required. In this study, the band of solutions that can be obtained from the variation in lengths of linkages and the effect of stiffness is generated to better understand the quality of the mechanism performance. The application of four bar mechanism in an aileron trim tab system that utilizes a rotatory actuator to move the tab surface is used to demonstrate the band of solutions. Then CATIA VS is used to layout the geometry and design the linkages within the prescribed airfoil. The MSC Adams is used to calculate the initial gearing ratio and for validation of values. A Matlabgcode is developed and used to analyze the effects of the variation of lengths and stiffness of linkages on the tab speed using closed form algebraic solution. Finally, a comparison is made to illustrate and quantify the effects of link lengths and stiffness on the gearing ratio/mechanical advantage of the system.en_US
dc.identifier.citationDessalegn, Abey; Yihun, Yimesker S.; Flores, Paulo; Lankarani, Hamid M. 2016. Effect of variation of link lengths and stiffness on the gearing ratio of a four bar mechanism with application to aircraft trim tabs. ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference Volume 5B: 39th Mechanisms and Robotics Conference Boston, Massachusetts, USA, August 2–5, 2015en_US
dc.identifier.isbn978-0-7918-5713-7
dc.identifier.otherWOS:000380413700061
dc.identifier.urihttp://dx.doi.org/10.1115/DETC2015-46054
dc.identifier.urihttp://hdl.handle.net/10057/12387
dc.language.isoen_USen_US
dc.publisherAmerican Society of Mechanical Engineersen_US
dc.relation.ispartofseriesASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference;v.5B
dc.rights.holderCopyright © 2015 by ASMEen_US
dc.subjectCompliant mechanismsen_US
dc.subjectPlanaren_US
dc.subjectDesignen_US
dc.subjectErroren_US
dc.titleEffect of variation of link lengths and stiffness on the gearing ratio of a four bar mechanism with application to aircraft trim tabsen_US
dc.typeConference paperen_US
Files
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.6 KB
Format:
Item-specific license agreed upon to submission
Description: