Finite element modeling and analysis of structural joints using nuts and bolts

No Thumbnail Available
Authors
Bhonge, Prasannakumar S.
Foster, Brian D.
Lankarani, Hamid M.
Advisors
Issue Date
2012
Type
Article
Keywords
Joints , Finite element analysis , Modeling
Research Projects
Organizational Units
Journal Issue
Citation
Bhonge, Prasannakumar S.; Foster, Brian D.; Lankarani, Hamid M. 2012. Finite element modeling and analysis of structural joints using nuts and bolts. ASME 2011 International Mechanical Engineering Congress and Exposition, v.3:Paper No. IMECE2011-62905, pp.73-83; 11 pages. Design and Manufacturing Denver, Colorado, USA, November 11–17, 2011
Abstract

The majority of the structural failures of mechanical structures and systems are found in joints rather than continuous material. Joints have historically consisted of assemblies involving nuts, bolts, screws, etc. and the design and analysis of these joints can be quite challenging. This work provides two baselines on the finite element modeling (PEM) methods and analysis of a nut and bolt joint. The first baseline involves a basic modeling method using linear calculation of 2D plates and bar elements, and the second baseline involves one of the more complex methods using non-linear calculation of 3D solids. The two methods are described for modeling of a joint for two test conditions, namely the double shear joint in tension with two different bolt sizes and two plate thicknesses. First, the simplified method of rigid elements and equivalent strength beam elements is considered. This technique lacks the simulation of bearing stresses, stress concentration at the bolt hole location, and bending stiffness of the bolt. The second method, uses 3D models that provides the actual nut and bolt surfaces, bearing stresses are introduced in the joint modeling. Classical hand calculations are carried out on the static tests and compared with the FEM results. Additionally, the effects of element mesh refinement on the nut and bolt contact surfaces, and types of contacts are analyzed for the 3D models. A parametric study is carried out on the stresses developed and stress concentration factors.

Table of Contents
Description
Click on the DOI link to access the article (may not be free).
Publisher
Amer Soc Mechanical Engineers
Journal
Book Title
Series
ASME 2011 International Mechanical Engineering Congress and Exposition;v.3:Design and Manufacturing
PubMed ID
DOI
ISSN
EISSN