Show simple item record

dc.contributor.authorKececi, Erkan
dc.contributor.authorAsmatulu, Ramazan
dc.date.accessioned2013-12-17T20:00:32Z
dc.date.available2013-12-17T20:00:32Z
dc.date.issued2012
dc.identifier.citationKececi, Erkan; Asmatulu, Ramazan. 2012. Effects of hydrophobic barrier films on the mechanical properties of fiber reinforced composites immersed in water. ASME 2011 International Mechanical Engineering Congress and Exposition, vol. 1:Paper No. IMECE2011-62752:pp. 913-919, Advances in Aerospace Technology; Energy Water Nexus; Globalization of Engineering; Posters Denver, Colorado, USA, November 11–17, 2011en_US
dc.identifier.isbn978-0-7918-5487-7
dc.identifier.otherWOS:000325040500103
dc.identifier.urihttp://dx.doi.org/10.1115/IMECE2011-62752
dc.identifier.urihttp://hdl.handle.net/10057/6966
dc.descriptionClick on the DOI link to access the article (may not be free).en_US
dc.description.abstractFiber reinforced composites are subjected to a wide range of mechanical loads and environmental conditions, such as wind, high/low temperature, moisture, UV light and aggressive solvents. Compared to other structural materials, polymers can absorb more moisture and UV light from outside environment and lose their material properties (e.g., mechanical, electrical, surface and thermal) and thus the service life. In this study, hydrophobic barrier films including polyvinylfluoride (PVF) and polyether ether ketone (PEEK) were applied on the carbon, Kevlar, and glass fiber reinforced epoxy resin composites (laminate and sandwich structures), and then the effects of moisture absorption on those films were investigated in detail. The coupons were immersed in water for a number of days in order to determine the changes in mechanical properties of the composites. Three point bending tests were applied to the laminate composites, while four point bending tests were conducted on the Nomex sandwich structured composites. We found that moisture absorption could be eliminated by using these hydrophobic films. We found that PEEK film could be an alternative barrier film for the aircraft industry.en_US
dc.language.isoen_USen_US
dc.publisherAmerican Society of Mechanical Engineersen_US
dc.relation.ispartofseriesASME 2011 International Mechanical Engineering Congress and Exposition;Volume 1:Paper No. IMECE2011-62752
dc.subjectCompositesen_US
dc.subjectAerospaceen_US
dc.subjectMoisture Absorptionen_US
dc.subjectMechanical Propertiesen_US
dc.titleEffects of hydrophobic barrier films on the mechanical properties of fiber reinforced composites immersed in wateren_US
dc.typeArticleen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record