Show simple item record

dc.contributor.authorCampbell-Kyureghyan, Naira
dc.contributor.authorJorgensen, Michael J.
dc.contributor.authorBurr, Deborah
dc.contributor.authorMarras, William S.
dc.date.accessioned2013-05-07T16:32:50Z
dc.date.available2013-05-07T16:32:50Z
dc.date.issued2005-06
dc.identifier.citationCampbell-Kyureghyan, Naira; Jorgensen, Michael J.; Burr, Deborah; Marras, William S. 2005. The prediction of lumbar spine geometry: method development and validation. Clinical Biomechanics, v.20 no.5 pp.455-464en_US
dc.identifier.issn0268-0033
dc.identifier.urihttp://dx.doi.org/10.1016/j.clinbiomech.2005.01.006
dc.identifier.urihttp://hdl.handle.net/10057/5673
dc.descriptionClick on the DOI link to access the article (may not be free).en_US
dc.description.abstractObjectives. To develop and validate a new method of predicting the neutral lumbar spine curve from external (non-invasive electrogoniometer) measurements. Background. Non-invasive techniques for lumbar spine geometry prediction suffer from a lack of a complete geometry description, problems with applicability to field conditions, or both. Methods.The study consisted of three steps. First, utilizing lateral imaging (MRI and X-ray pictures) of the lumbosacral junction, the torso geometry was described using measures of lumbar lordosis via the Cobb method. Second, the relationship between imaging based measurement of lumbar spinal curvature and externally measured torso flexion angle in the sagittal plane using a goniometer was determined. Finally, method validation was performed with an independent set of nine subjects. The predicted lumbar spine curve was determined and the prediction errors were analyzed against the measured curves from digitized lateral X-ray images of the lumbosacral junction. Results.The shape of the lumbar curve was described as function of three externally measured parameters. The lumbar spine Cobb angle, segmental centroid positions (S1−T12), and segmental orientations were predicted from the external lumbar motion monitor measurements, with average precisions of 5.8°, 4.4 mm, and 3.9°, respectively. Conclusions.The position and orientation of each segment (vertebrae and disc), along with the lumbar spine lordosis, can be predicted in the neutral posture using data from back angular measurements.en_US
dc.language.isoen_USen_US
dc.publisherElsevieren_US
dc.relation.ispartofseriesClinical Biomechanics;v.20 no.5
dc.subjectLumbar lordosisen_US
dc.subjectLumbar motion monitoren_US
dc.subjectVertebral positionen_US
dc.subjectGeometric modelen_US
dc.subjectModel validationen_US
dc.titleThe prediction of lumbar spine geometry: method development and validationen_US
dc.typeArticleen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record