Show simple item record

dc.contributor.advisorKeshavanarayana, Suresh R.
dc.contributor.authorHabeeb, Shamsuzuha
dc.date.accessioned2013-04-12T14:08:21Z
dc.date.available2013-04-12T14:08:21Z
dc.date.copyright2012en
dc.date.issued2012-12
dc.identifier.othert12081
dc.identifier.urihttp://hdl.handle.net/10057/5596
dc.descriptionThesis (M.S.)--Wichita State University, College of Engineering, Dept. of Aerospace Engineeringen_US
dc.description.abstractThe crack arrest capabilities and the load bearing characteristic of a stiffened and unstiffened panel subjected to remote tension loading is examined in this work. We make use of cohesive interface elements to predict the behavior of the center crack stiffened and unstiffened panels using a nonlinear traction-separation relationship. This thesis describes an application of traction-separation model on a four stringer stiffened wide panel with and without a disbond, and also an unstiffened panel with a center crack and compare their residual strengths. Aluminum 2024-T3 alloy panels were tested as a part of another study and the measured values were used to compare the numerical results. The predicted crack growth and residual predictions shows fair convergence with experimental values. The strength of the stiffened panel was observed to be much higher (55%) than that of that unstiffened panel. Moreover the presence of the disbond of 1” caused a 9% drop in the residual strength and disbond lesser than 1” does not lead to a drop in strength. The stiffened panel readily supported the transfer of load from the plate to the stiffener, thus aiding in the crack growth arrest.en_US
dc.format.extentxii, 93en
dc.language.isoen_USen_US
dc.publisherWichita State Universityen_US
dc.rightsCopyright Shamsuzuha Habeeb, 2012. All rights reserveden
dc.subject.lcshElectronic dissertationsen
dc.titleCrack arrest capabilities of an adhesively bonded skin and stiffeneren_US
dc.typeThesisen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

  • Master's Theses [1357]
    This collection includes Master's theses completed at the Wichita State University Graduate School (Fall 2005 --)
  • AE Theses and Dissertations [134]
    Electronic copies of theses and dissertations defended in the Department of Aerospace Engineering

Show simple item record