Analysis and optimization of controlling parameters during impingement of single un-bound jet
Rahman, Muhammad M.
MetadataShow full item record
Shevade, S., Rahman, M., & Guldiken, R. (2018). Analysis and optimization of controlling parameters during impingement of single un-bound jet. Paper presented at the Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer, , 2018-July 757-768. doi:10.1615/THMT-18.800 Retrieved from www.scopus.com
Convective heat transfer coefficient and its interdependency with various key parameters are analyzed. Air is used as the working fluid impinging on the flat surface. A thorough investigation of velocity and temperature distributions was performed by varying Nozzle Velocity and Height over Diameter ratio (H/D). Nusselt number and Turbulent Energy are presented for the impingement surface. It was found that for H/D ratios ranging between 6 and 8, nozzle velocities over 20 m/s provide a large percentage increase in heat transfer.
Click on the DOI to access this article (may not be free).