Show simple item record

dc.contributor.authorSubeshan, Balakrishnan
dc.contributor.authorAsmatulu, Ramazan
dc.date.accessioned2022-06-21T18:36:13Z
dc.date.available2022-06-21T18:36:13Z
dc.date.issued2022-05-28
dc.identifier.citationSubeshan, B., & Asmatulu, R. (2022 ). Corrosion mitigation of metals and alloys via superhydrophobic coatings with plasma surface and heat treatment processes. Engineering Failure Analysis, 139. https://doi.org/https://doi.org/10.1016/j.engfailanal.2022.106437
dc.identifier.issn1350-6307
dc.identifier.urihttps://doi.org/10.1016/j.engfailanal.2022.106437
dc.identifier.urihttps://soar.wichita.edu/handle/10057/23476
dc.descriptionClick on the DOI to access this article (may not be free).
dc.description.abstractMany industries utilize metals and alloys because of their exceptional properties, including high strength, conductivity, load-bearing capability, ductility, creep, and fatigue resistance. Among the metals and alloys, aluminum and its alloys are mostly subject to corrosion when encountering under severely adverse conditions that result in oxidation, failure of metallurgic luster, modifications in the sizes, strength, and changes in other physical and chemical properties. In this study, we produce superhydrophobic coated (SHC) aluminum 2024 alloy (AA2024) substrates for corrosion mitigation using a combination of physical and chemical modification processes. Plasma surface and heat treatment have been utilized for physical modification by forming nano-scaled roughness on the AA2024 substrates. To improve the surface hydrophobicity, chemical modification was achieved using low surface energy coatings. The corrosion behavior of plasma surface and heat-treated superhydrophobic coated (PSH-SHC) AA2024 substrates were evaluated by immersing into a 3.0% sodium chloride (NaCl) solution. The domination of plasma surface and heat treatment on the surface roughness, wettability, and corrosion resistance of the prepared AA2024 substrates was examined by applying water contact angle (WCA) measurements, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and salt soaking tests. The test results confirm that the PSH-SHC AA2024 substrates remain superhydrophobic with a WCA ? 168° for an extended period of time with superior corrosion resistance in harsh environments. The WCA measurements slowly reduced from 168° to 157° after immersion in the 3.0% NaCl solution for 30 days. It demonstrates that the plasma surface and heat treatment mechanisms drastically enhanced the adhesive strength between the AA2024 substrate and the superhydrophobic coatings. The PDP and EIS results also showed that the corrosion rates of the 8H-PSH-SHC AA2024 substrate were undesirably low and raised with expending immersion time in the 3.0% NaCl solution. It is concluded that techniques applied in this study are found to be promising and critically important for a longer service time of the metals and alloys for broader industrial applications to mitigate the corrosion problems.
dc.language.isoen_US
dc.publisherElsevier Ltd
dc.relation.ispartofseriesEngineering Failure Analysis
dc.relation.ispartofseriesVol. 139
dc.subjectSuperhydrophobic coating
dc.subjectSurface treatments
dc.subjectCorrosion prevention
dc.titleCorrosion mitigation of metals and alloys via superhydrophobic coatings with plasma surface and heat treatment processes
dc.typeArticle
dc.rights.holder© 2022 Elsevier Ltd.


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record