Browsing Engineering by Title
Now showing items 1691-1710 of 3411
-
Increasing general aviation (GA) pilot reports (PIREPs) through reducing errors
(Association for Industry, Engineering and Management Systems (AIEMS), 2021-06)The purpose of this study was to increase General Aviation (GA) pilot reports (PIREPs) through reducing errors, trust issues, and inaccuracies in PIREP submittals that prevent inclusion in the PIREP system. PIREPs are an ... -
Increasing the coating resistance against UV degradation and corrosion using nanocomposite coating
(Wichita State University, 2009-12)In this research project, a nanocomposite coating was developed using multiwall carbon nanotubes (MWCNT) associated with epoxy primer in order to increase coating resistance against ultra-violet radiation and corrosion. ... -
Increasing the lifetime of products by nanomaterial inclusions—life cycle energy implications
(Springer, 2020-07-27)Purpose: Typically, the high energy required to manufacture nanomaterials is weighed against the benefits transferred to a product. Adequately establishing the environmental characteristics of a product that contains ... -
Index
(Elsevier, 2013) -
Indoor air quality in California homes with code-required mechanical ventilation
(Blackwell Munksgaard, 2020-04-18)Data were collected in 70 detached houses built in 2011-2017 in compliance with the mechanical ventilation requirements of California's building energy efficiency standards. Each home was monitored for a 1-week period with ... -
Industrial facilities non-process energy
(Taylor & Francis Inc, 2014-04-18)In this study, published information on non-process energy use, which includes lighting, heating, cooling, ventilation, humidity control, and particulate control, for industrial buildings has been analyzed and compiled and ... -
Industrial facilities nonprocess energy
(Taylor & Francis, 2017)In this study, published information on nonprocess energy use, which includes lighting, heating, cooling, ventilation, humidity control, and particulate control, for industrial buildings has been analyzed and compiled and ... -
Industrial facilities overhead energy estimation
(American Society of Mechanical Engineers, 2014-06-30)In this study, two important techniques for estimating the nonprocess energy in industrial and manufacturing buildings were examined. The building energy data for two industrial facilities were collected and analyzed. The ... -
Industrial facility nonprocess energy life cycle information
(Wichita State University, 2011-12)In this study, published information on nonprocess energy use, which includes lighting, heating, cooling, ventilation, humidity control, and particulate control, for industrial buildings has been analyzed and compiled and ... -
Industry capstone projects as a vehicle for faculty development
(Industry, Engineering & Conference Management Systems Conference, 2020-03)There is a trend in Engineering education pedagogy focus from problem-based learning to project-based learning. An impediment to this shift in Engineering Education lies in faculty preparation. Strategies to help faculty ... -
An Inexpensive plug-and-play hardware security module to restore systems from malware attacks
(IEEE, 2013)Despite the booming of cloud computing, people will be using PCs for various good reasons including connecting to the cloud server. According to a 2009 report, more than two million people in every month have had their ... -
Inferior vena cava filter blockage: a study on the pressure gradient across a Greenfield filter
(Wichita State University. Graduate School., 2006-04-28) -
Influence of a truck side under-ride guard height on cabin intrusion and occupant injury potential of a small car in car/large-truck side crashes--a preliminary study
(Wichita State University. Graduate School, 2011-05-04)In car/truck collisions, the size, weight, and stiffness mismatch results in much larger structural deformation of the car re to the truck. This is further aggravated when the passenger vehicle trends beneath the rear or ... -
Influence of codecs on adaptive jitter buffer algorithm
(IEEE, 2007-09-30)Transmitting real-time audio or video applications over the Internet is a challenge for current networking technology. Reduced overhead and enhancement of services are the motivations for deploying voice communications. ... -
Influence of codecs on adaptive jitter buffer algorithm
(Wichita State University. Graduate School., 2007-04-27)Transmitting real-time audio or video applications over the Internet is a challenge in the current networking technology. The motivation for deploying real-time applications includes the reduction in voice communicati ... -
Influence of codecs on adaptive jitter buffer algorithm
(2006-07)Transmitting real-time audio or video applications over the Internet is a challenge in the current technology. The motivation for deploying this technology is the reduction in voice communication overheads and the enhancement ... -
Influence of different passive shoulder exoskeletons on shoulder and torso muscle activation during simulated horizontal and vertical aircraft squeeze riveting tasks
(Elsevier Ltd, 2022-06-08)Aircraft manufacturing involves riveting utilizing squeeze riveting tools at heights from below elbow to overhead levels. This study assessed utilization of passive shoulder exoskeletons on shoulder and torso muscle ... -
Influence of functionalized carbon nanofibers on the single carbon fiber-epoxy matrix interface
(Elsevier, 2013-06-12)Amine-functionalized carbon nanofibers (A-CNFs) were deposited on the surface of individual sized carbon fibers using electrophoretic deposition (EPD), and the average interfacial shear strength (IFSS) was determined using ... -
Influence of motorcycle crash bars on the injury biomechanics of a rider
(Wichita State University, 2022-12)A major proportion of motorcycle rider casualties is caused due to crashes against barriers or other automobiles such as cars, trucks, etc. The injury and fatality rates are higher in Asian countries as they are used as ... -
Influence of optical thickness on the melting of a phase change material in a thermal energy storage module
(Springer, 2020-03-04)Thermal energy storage using phase change material (PCM) is needed for renewable power generation using solar energy. In the present investigation, the discrete-ordinate method is used to numerically investigate the radiative ...