Show simple item record

dc.contributor.authorSeneviratne, Waruna P.
dc.contributor.authorTomblin, John S.
dc.contributor.authorSaathoff, Brandon L.
dc.date.accessioned2022-01-24T20:53:51Z
dc.date.available2022-01-24T20:53:51Z
dc.date.issued2021
dc.identifier.citationSeneviratne, W., Tomblin, J., & Saathoff, B. (2021). Electroplating polymer based additive manufactured parts for enhanced structural performance. Paper presented at the 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021, , 3 1859-1871. doi.org/10.12783/asc36/35881en_US
dc.identifier.isbn978-171383759-6
dc.identifier.urihttps://doi.org/10.12783/asc36/35881
dc.identifier.urihttps://soar.wichita.edu/handle/10057/22461
dc.descriptionClick on the DOI link to access the conference paper (may not be free).en_US
dc.description.abstractAdditive manufacturing has been adopted in many aerospace and defense applications to reduce weight and buy-to-fly ratios of low-volume high- complexity parts. Polymer-based additive manufacturing processes such as Fused Deposition Modeling (FDM) has enabled aerospace manufactures to improve the structural efficiency of parts through generative design or topology optimization. This level of design freedom did not exist in the past due to limitations associated with traditional manufacturing processes such as subtractive machining. Improvements in the material and the maturation of the FDM process has led to the production of many non-structural flightworthy parts used in aircraft today. Polymer-based additive manufacturing can be further leveraged in aerospace applications with the addition of electroplated coatings that act as reinforcement. While many of the commonly known electroplated coating applications involve enhancing the part appearance, electroplated coatings can also improve the strength, stiffness, and durability of plastic parts. Depending on the use case, the thickness of the metallic plating material (combination of copper and nickel) can be tailored to achieve the desired composite properties (metal and polymer). In this research, the tensile and flexural mechanical properties were assessed for Ultem™ 9085 FDM printed specimens and compared to specimens with metallic coating thicknesses of approximately 75-μm, 150-μm, and 300-μm. Non- destructive inspections using x-ray computed tomography were performed prior to mechanical testing to assess the electroplated coating thickness variation and overall quality.en_US
dc.description.sponsorshipThis work is performed as a part of the Office of Naval Research Project titled Electrodeposition of Nanocrystalline Coating on Additive Manufactured Parts for Enhanced Structural Performance. Authors would like to acknowledge the support from Dr. Anisur Rahman at the Office of naval Research and the research team at NIAR/WSU for the technical guidance and support.en_US
dc.language.isoen_USen_US
dc.publisherDEStech Publicationsen_US
dc.relation.ispartofseries36th Technical Conference of the American Society for Composites 2021;
dc.subjectAdditive manufacturingen_US
dc.subjectElectroplatingen_US
dc.subjectNon-destructive inspectionen_US
dc.titleElectroplating polymer based additive manufactured parts for enhanced structural performanceen_US
dc.typeConference paperen_US
dc.rights.holder© 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021.en_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record