Show simple item record

dc.contributor.authorMemon, Shabbir
dc.contributor.authorPaidar, Moslem
dc.contributor.authorOjo, Olatunji Oladimeji
dc.contributor.authorCooke, Kavian O.
dc.contributor.authorBabaei, Behzad
dc.contributor.authorMasoumnezhad, Mojtaba
dc.date.accessioned2020-11-05T19:41:57Z
dc.date.available2020-11-05T19:41:57Z
dc.date.issued2020-12
dc.identifier.citationMemon, Shabbir; Paidar, Moslem; Ojo, Olatunji Oladimeji; Cooke, Kavian O.; Babaei, Behzad; Masoumnezhad, Mojtaba. 2020. The role of stirring time on the metallurgical and mechanical properties during modified friction stir clinching of AA6061-T6 and AA7075-T6 sheets. Results in Physics, vol. 19:art. no. 103364en_US
dc.identifier.issn2211-3797
dc.identifier.urihttps://doi.org/10.1016/j.rinp.2020.103364
dc.identifier.urihttps://soar.wichita.edu/handle/10057/19580
dc.description© 2020 Authors. Open access. This article is available under the Creative Commons CC-BY-NC-ND license and permits non-commercial use of the work as published, without adaptation or alteration provided the work is fully attributed.en_US
dc.description.abstractIn this study, the modified friction stir clinching process was successfully utilized to weld the AA7075-T6 to AA6061-T6 aluminum alloys. The approach of this study was to appraise the influence of the stirring time (6, 12, and 18 s) on the metallurgical and mechanical behavior of the welded samples. The microstructural study demonstrated that stirring time significantly affected joint properties and material flow, which can be ascribed to the discrepancy in the properties of the Al alloys used in this study. Void, local melting and defect-free joints were produced under the stirring times of 6 s, 18 s, and 12 s respectively. It was found that tensile/shear strength increased significantly from 63.5 MPa to 109 MPa as the stirring time increased from 6 s to 12 s, while a further increase in the stirring time to 18 s significantly decreased the joint's strength to 76.1 MPa. The observed failed samples showed that stirring time did not influence fracture mode.en_US
dc.language.isoen_USen_US
dc.publisherElsevieren_US
dc.relation.ispartofseriesResults in Physics;v.19:art.no.103364
dc.subjectAA6061-T6 aluminum alloyen_US
dc.subjectAA7075-T6 aluminum alloyen_US
dc.subjectMode fracture, Mechanical propertiesen_US
dc.subjectModified friction stir clinchingen_US
dc.subjectStirring timeen_US
dc.titleThe role of stirring time on the metallurgical and mechanical properties during modified friction stir clinching of AA6061-T6 and AA7075-T6 sheetsen_US
dc.typeArticleen_US
dc.rights.holder© 2020 The Authors.en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record