Show simple item record

dc.contributor.authorBhavsar, Pavan
dc.contributor.authorLopez-Hawa, Homar
dc.contributor.authorAnanda-Kumar, Rajesh
dc.contributor.authorMadhavan, Viswanathan
dc.contributor.authorMoscoso-Kingsley, Wilfredo
dc.date.accessioned2019-10-03T14:43:28Z
dc.date.available2019-10-03T14:43:28Z
dc.date.issued2019
dc.identifier.citationBhavsar, Pavan; Lopez-Hawa, Homar; Ananda-Kumar, Rajesh; Madhavan, Viswanathan; Moscoso-Kingsley, Wilfredo. 2019. Adiabatic shear banding behavior of additively manufactured superalloy in 625. Procedia Manufacturing, vol. 34:pp 722-730en_US
dc.identifier.issn2351-9789
dc.identifier.urihttps://doi.org/10.1016/j.promfg.2019.06.228
dc.identifier.urihttp://hdl.handle.net/10057/16734
dc.description© 2019 The Authors. Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.en_US
dc.description.abstractAdditively manufactured nickel superalloy (IN 625) has gained popularity as an alternative to produce high value products of complex geometries for high strength applications under high temperature and corrosive environments. Many of these applications also demand the alloy to withstand high strain rate plastic deformation before the onset of catastrophic failure. The alloy's utility for high strain rate applications would be compromised if it were to fail suddenly by mechanisms such as adiabatic shear localization. This paper evaluates the shear localization behavior of an additively manufactured IN 625, and compares it to the behavior of the material of equal nominal composition, but prepared by traditional cast-wrought processing. The evaluation was made by imposing pure shear at strain rates of the order of 10,000 1/s in a simple machining configuration. It was found that the additive alloy experienced adiabatic shear banding more readily than the cast-wrought counterpart did. This finding contradicted predictions based on constitutive models developed for both alloys from split-Hopkinson compression testing, which indicated that the additive alloy strain hardened more than the cast-wrought counterpart did.en_US
dc.description.sponsorshipDepartment of Energy, National Nuclear Security Administration under Award Number DE-NA0003222.en_US
dc.language.isoen_USen_US
dc.publisherElsevieren_US
dc.relation.ispartofseriesProcedia Manufacturing;v.34
dc.subjectMachiningen_US
dc.subjectAdditive manufacturingen_US
dc.subjectSuperalloyen_US
dc.subjectDynamic behavioren_US
dc.subjectAdiabatic shear bandingen_US
dc.titleAdiabatic shear banding behavior of additively manufactured superalloy in 625en_US
dc.typeConference paperen_US
dc.rights.holder© 2019 The Authors. Published by Elsevier B.V.en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record