Show simple item record

dc.contributor.authorYay, Guven
dc.contributor.authorNizam Uddin, Md
dc.contributor.authorAsmatulu, Ramazan
dc.date.accessioned2019-06-10T14:03:01Z
dc.date.available2019-06-10T14:03:01Z
dc.date.issued2018-10
dc.identifier.citationYay, Guven; Nizam Uddin, Md; Asmatulu, Ramazan. 2018. Modeling and analysis of CNT wires subjected to external tensile loads. 5th Annual Composites and Advanced Materials Expo, CAMX 2018; Kay Bailey Hutchison Convention CenterDallas; United States; 15 October 2018 through 18 October 2018; Code 144723en_US
dc.identifier.urihttps://www.researchgate.net/publication/329306123_Modeling_and_Analysis_of_CNT_Wires_Subjected_to_External_Tensile_Loads
dc.identifier.urihttps://www.nasampe.org/store/ViewProduct.aspx?id=12936408
dc.identifier.urihttp://hdl.handle.net/10057/16336
dc.descriptionClick on the URI link to access the article (may not be free).en_US
dc.description.abstractCarbon nanotubes (CNTs) have been processed to yarns/wires/strands, as well as woven, non-woven and braided textiles via textile technologies, aiming to utilize their remarkable mechanical, electrical and thermal properties at micro/macro scales. Since CNT yarns/wires are the fundamental units of many structures, their mechanical properties, such as tensile modulus and strength, are crucial factors to determine the mechanical performance of such textiles under different conditions. This study develops a suitable model to predict the tensile strengths of CNT wires based on their twisting condition with the number of CNT yarn configuration. Femap finite element analysis software was used as a modeling tool while Automatic Dynamic Incremental Nonlinear Analysis (ADINA) software was used as a solver of advanced non-linear analysis (SOL 601) for twisted CNT wires consisting of 31 yarns. The numerical model was used to simulate CNT yarns interactions with each other, and 18.23%, 17.08%, and 16.02% strain cases were utilized to compare the experimental test results. It was observed that helix angles reduced to 12.4° on 18.23% strain case, whereas numerical model result showed 6° reduction on helix angles. Similar results were observed on 17.08% and 16.02% strain cases. Test data showed about 10.4° helix angle reduction for 17.08% strain and 9.4° helix angle reduction for 16.02% strain cases, whereas the numerical model produced 4.7° and 3.9° reductions for 17.08% and 16.02% strain cases, respectively. These variations may be because of the no-uniformity of CNT wires, local plastic deformations and sliding of individual CNTs in the yarns. Several small models were created using equivalent properties and analysis setup to ensure that models are converging prior to running the model of 31 yarn CNT twisted wires.en_US
dc.description.sponsorshipAir Force Institute of Technology/Air Force Research Laboratory and Wichita State University for technical and financial support.en_US
dc.language.isoen_USen_US
dc.publisherComposites and Advanced Materials Expo (CAMX)en_US
dc.relation.ispartofseriesComposites and Advanced Materials Expo;2018
dc.subjectCarbon nanotubesen_US
dc.subjectMechanical propertiesen_US
dc.subjectNonlinear analysisen_US
dc.subjectSolsen_US
dc.subjectTensile strengthen_US
dc.subjectTextilesen_US
dc.subjectWeavingen_US
dc.subjectWireen_US
dc.subjectWoolen_US
dc.subjectYarnen_US
dc.titleModeling and analysis of CNT wires subjected to external tensile loadsen_US
dc.typeConference paperen_US
dc.rights.holder© 2018. Used by CAMX - The Composites and Advanced Materials Expo. CAMX Conference Proceedings. Dallas, TX.en_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record