Show simple item record

dc.contributor.authorChen, Zheng
dc.contributor.authorNaizer, Brent
dc.date.accessioned2016-08-28T23:48:35Z
dc.date.available2016-08-28T23:48:35Z
dc.date.issued2015
dc.identifier.citationZ. Chen and B. Naizer, "A cascade control for Sander automation system," 2015 IEEE International Conference on Automation Science and Engineering (CASE), Gothenburg, 2015, pp. 894-899en_US
dc.identifier.isbn978-1-4673-8183-3
dc.identifier.otherWOS:000380453000148
dc.identifier.urihttp://dx.doi.org/10.1109/CoASE.2015.7294195
dc.identifier.urihttp://hdl.handle.net/10057/12404
dc.descriptionClick on the DOI link to access the article (may not be free).en_US
dc.description.abstractHydraulic fracturing is one of the key technologies that are currently used for shale oil and gas production. Sander is the equipment that delivers various types of sand with desired sand rate demand and dumps the sand to the blender's sand hopper for hydraulic fracturing. Due to the limited capacity of sand hopper as well as the high amplitude of internal disturbance, it is a great challenge to maintain the hopper's sand level at a setting point. In this paper, a cascade control is developed for the Sander automation system to actively reject the internal disturbance. The cascade control employes an inner-loop PI control for tracking the disturbance and an outer-loop PI control for maintaining the sand level, respectively. A disturbance-amplitude-dependent gain scheduling algorithm is developed for the outer-loop control, which enables the control to adjust its time response to the amplitude of the disturbance. With the cascade control, the Sander automation system is able to actively reject the internal disturbance in the inner-loop and gradually compensate the static errors of sand rate and sand rate demand in the outer-loop. A relay feedback approach is developed to tune the PI gains for the inner-loop and outer-loop controls. Both simulation and hydraulic fracturing job testing results have verified that the cascade control is reliable and practical for the Sander automation system.en_US
dc.language.isoen_USen_US
dc.publisherIEEEen_US
dc.relation.ispartofseries2015 IEEE International Conference on Automation Science and Engineering (CASE);
dc.subjectPI controlen_US
dc.subjectCascade controlen_US
dc.subjectError compensationen_US
dc.subjectNatural gas technologyen_US
dc.subjectGas technologyen_US
dc.subjectOil drillingen_US
dc.subjectSanden_US
dc.subjectShale gasen_US
dc.titleA cascade control for Sander automation systemen_US
dc.typeConference paperen_US
dc.rights.holder© Copyright 2016 IEEE - All rights reserved.en_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record