Show simple item record

dc.contributor.authorYe, Zhihang
dc.contributor.authorFaisal, Md. Shahnewaz Sabit
dc.contributor.authorAsmatulu, Ramazan
dc.contributor.authorChen, Zheng
dc.date.accessioned2015-06-25T19:55:59Z
dc.date.available2015-06-25T19:55:59Z
dc.date.issued2015-04-01
dc.identifier.citationZhihang Ye ; Md. Shahnewaz Sabit Faisal ; Ramazan Asmatulu ; Zheng Chen; Bio-inspired artificial muscle structure for integrated sensing and actuation . Proc. SPIE 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015, 943024 (April 1, 2015)en_US
dc.identifier.isbn978-1-62841-533-9
dc.identifier.issn0277-786X
dc.identifier.otherWOS:000355580900059
dc.identifier.urihttp://dx.doi.org/10.1117/12.2085882
dc.identifier.urihttp://hdl.handle.net/10057/11305
dc.descriptionClick on the DOI link to access the article (may not be free).en_US
dc.description.abstractIn this paper, a novel artificial muscle/tendon structure is developed for achieving bio-inspired actuation and self-sensing. The hybrid structure consists of a dielectric elastomer (DE) material connected with carbon fibers, which incorporates the built-in sensing and actuation capability of DE and mechanical, electrical interfacing capability of carbon fibers. DEs are light weight artificial muscles that can generate compliant actuation with low power consumption. Carbon fibers act as artificial tendon due to their high electro-conductivity and mechanical strength. PDMS material is used to electrically and mechanically connect the carbon fibers with the DE material. A strip actuator was fabricated to verify the structure design and characterize its actuation and sensing capabilities. A 3M VHB 4905 tape was used as the DE material. To make compliant electrodes on the VHB tape, carbon black was sprayed on the surface of VHB tape. To join the carbon fibers to the VHB tape, PDMS was used as bonding material. Experiments have been conducted to characterize the actuation and sensing capabilities. The actuation tests have shown that the energy efficiency of artificial muscle can reach up to 0.7% and the strain can reach up to 1%. The sensing tests have verified that the structure is capable of self-sensing through the electrical impedance measurement.en_US
dc.language.isoen_USen_US
dc.publisherSPIE, American Society of Mechanical Engineersen_US
dc.relation.ispartofseriesElectroactive Polymer Actuators and Devices (EAPAD) 2015;v.9430
dc.subjectDielectric elastomeren_US
dc.subjectArtificial musclesen_US
dc.subjectCarbon fibersen_US
dc.subjectArtificial tendonen_US
dc.titleBio-inspired artificial muscle structure for integrated sensing and actuationen_US
dc.typeConference paperen_US
dc.rights.holderSPIE © 1962 - 2015. All Rights Reserved.


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record