Show simple item record

dc.contributor.authorAlarifi, Ibrahim M.
dc.contributor.authorAlharbi, Abdulaziz
dc.contributor.authorKhan, Waseem Sabir
dc.contributor.authorAsmatulu, Ramazan
dc.date.accessioned2015-06-25T19:34:35Z
dc.date.available2015-06-25T19:34:35Z
dc.date.issued2015-04-01
dc.identifier.citationIbrahim M. Alarifi ; Abdulaziz Alharbi ; Waseem S. Khan ; Ramazan Asmatulu; Electrospun carbon nanofibers for improved electrical conductivity of fiber reinforced composites . Proc. SPIE 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015, 943032 (April 1, 2015)en_US
dc.identifier.isbn978-1-62841-533-9
dc.identifier.issn0277-786X
dc.identifier.otherWOS:000355580900078
dc.identifier.urihttp://dx.doi.org/10.1117/12.2179706
dc.identifier.urihttp://hdl.handle.net/10057/11304
dc.descriptionClick on the DOI link to access the article (may not be free).en_US
dc.description.abstractPolyacrylonitrile (PAN) was dissolved in dimethylformamide (DMF), and then electrospun to generate nanofibers using various electrospinning conditions, such as pump speeds, DC voltages and tip-to-collector distances. The produced nanofibers were oxidized at 270 degrees C for 1 hr, and then carbonized at 850 degrees C in an argon gas for additional 1 hr. The resultant carbonized PAN nanofibers were placed on top of the pre-preg carbon fiber composites as top layers prior to the vacuum oven curing following the pre-preg composite curing procedures. The major purpose of this study is to determine if the carbonized nanofibers on the fiber reinforced composites can detect the structural defects on the composite, which may be useful for the structural health monitoring (SHM) of the composites. Scanning electron microscopy images showed that the electrospun PAN fibers were well integrated on the pre-preg composites. Electrical conductivity studies under various tensile loads revealed that nanoscale carbon fibers on the fiber reinforced composites detected small changes of loads by changing the resistance values. Electrically conductive composite manufacturing can have huge benefits over the conventional composites primarily used for the military and civilian aircraft and wind turbine blades.en_US
dc.language.isoen_USen_US
dc.publisherSPIE, American Society of Mechanical Engineersen_US
dc.relation.ispartofseriesElectroactive Polymer Actuators and Devices (EAPAD) 2015;v.9430
dc.subjectElectrospinningen_US
dc.subjectPAN nanofibersen_US
dc.subjectCarbonizationen_US
dc.subjectElectrical conductivitiesen_US
dc.subjectStructural health monitoringen_US
dc.subjectCompositesen_US
dc.titleElectrospun carbon nanofibers for improved electrical conductivity of fiber reinforced compositesen_US
dc.typeConference paperen_US
dc.rights.holderSPIE © 1962 - 2015. All Rights Reserved.


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record