Improving water-splitting efficiency of water electrolysis process via highly conductive nanomaterials at lower voltages
Uddin, M. Nizam Nageshkar, Vishal Vinayak Asmatulu, Ramazan
Uddin, M. Nizam
Nageshkar, Vishal Vinayak
Asmatulu, Ramazan
Other Names
Location
Time Period
Advisors
Original Date
Digitization Date
Issue Date
2020-01-11
Type
Article
Genre
Keywords
Conductive nanoparticles,Hydrogen production rate,Lower energy input,Renewable energy
Subjects (LCSH)
Citation
Uddin, M.N., Nageshkar, V.V. & Asmatulu, R. Energ. Ecol. Environ. (2020)
Abstract
The present study explores the opportunity to enhance the hydrogen production rate (HPR) at lower voltage in water electrolysis process by introducing conductive nanoparticles into electrolyte. The development of sustainable, cost-effective, reliable, clean, efficient, and renewable resources of energy systems is crucial for meeting the increasing energy demand. Among the various technologies developed to produce hydrogen, water electrolysis is the simplest, easy to operate, and ready to use in many industries, but it is still not cost-effective. Three different conductive nanomaterials: graphene nanoflakes, multi-wall carbon nanotubes (MWCNTs), and indium tin oxide, were incorporated into acidic electrolyte solutions of the water-splitting process. Experimental results reveal that among these nanomaterials, the incorporation of MWCNTs and graphene nanoflakes into electrolyte solutions considerably improved HPR. The highest HPR was observed at MWCNTs concentration of between 0.25 and 0.5 wt%. At 0.5 wt% MWCNTs and applied voltage of 4 V, about 170% improvement in the HPR was achieved when compared to base case (without nanoparticles into the electrolyte). An applied voltage of 10 V with the same MWCNTs concentration produced the maximum HPR of 2.7 ml/min. At the same concentration and voltage, the introduction of graphene into the electrolyte produced HPR of 2.5 ml/min. The effects of acid concentration and temperature on the HPR were also investigated. The HPR gradually increased with increasing acid concentrations in the dispersion due to the concentrations of ionic activators, which weakens the strength between oxygen and hydrogen bonds. Higher temperature also ameliorates the HPR because of the reduced bond strength. This approach of using nanomaterials in the electrolysis process could save up to 30% of energy input during this procedure.
Table of Contents
Description
Click on the DOI link to access the article (may not be free).
Publisher
Joint Center on Global Change and Earth System Science of the University of Maryland and Beijing Normal University
Journal
Book Title
Series
Energy, Ecology and Environment;2020
Digital Collection
Finding Aid URL
Use and Reproduction
Archival Collection
PubMed ID
DOI
ISSN
2363-7692