Show simple item record

dc.contributor.advisorTalia, Jorge E.en_US
dc.contributor.authorBanwasi, Nitin
dc.date.accessioned2007-08-21T14:03:42Z
dc.date.available2007-08-21T14:03:42Z
dc.date.issued2005-12
dc.identifier.isbn9780542757570
dc.identifier.othert05038
dc.identifier.otherAAT 1436545:UMI
dc.identifier.urihttp://hdl.handle.net/10057/751
dc.descriptionThesis (M.S.)--Wichita State University, College of Engineering, Dept. of Mechanical Engineering.en
dc.description"Dec 2005."en
dc.description.abstractThe potential of the Friction Stir Welding (FSW) process is easily observed in the creation of defect free welds in almost all of the Aluminum alloys. The success and applicability of the process, however, will depend on the performance of the welds compared to other joining processes. Experimental testing and evaluation are necessary for the determination of the mechanical response of Friction Stir Welds and vital to the development and optimization of the FSW process. The goal of this experimental testing of Friction Stir Welds is to obtain the data necessary to begin understanding the effects of the FSW process. An attempt has been made to systematically examine the effects of FSW process parameters and alloy on the weld properties. An attempt has been made to evaluate and compare High Speed and Low Speed Friction Stir Welds.en
dc.format.extent2126052 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoen_USen
dc.rightsCopyright Nitin Banwasi, 2005. All rights reserved.en
dc.subject.lcshElectronic dissertationsen
dc.titleMechanical testing and evaluation of high-speed and low-speed friction stir weldsen
dc.typeThesisen


Files in this item

Icon

This item appears in the following Collection(s)

Show simple item record