Now showing items 41-60 of 340

  • A cascade control for Sander automation system 

    Chen, Zheng; Naizer, Brent (IEEE, 2015)
    Hydraulic fracturing is one of the key technologies that are currently used for shale oil and gas production. Sander is the equipment that delivers various types of sand with desired sand rate demand and dumps the sand to ...
  • Case study of microgrid for electrification and its benefits in rural Nepal 

    Basnet, Saurav Man Singh; Aburub, Haneen Mohammad Dawoud; Jewell, Ward T.; Poudel, Amir (IEEE, 2015)
    This paper describes a microgrid for electrification of an isolated rural village in Nepal. Photovoltaic and various storage systems were modeled to find the optimal design. The economic and environmental impacts are also studied.
  • Centralized two-way AF MIMO multiple dispersed relay network 

    Lee, Kanghee; Yang, Jie; Kwon, Hyuck M.; Park, Hyuncheol; Lee, Yong H. (IEEE, 2015-05-12)
    This paper considers a two-way amplify-and-forward (AF) multiple-input multiple-output (MIMO) relay network consisting of two sources (each with multiple antennas) and multiple physically dispersed single-antenna relays. ...
  • Channel capacities of parallel and serial modulo-sum relay networks 

    Sagar, Youvaraj T.; Yang, Jie; Kwon, Hyuck M. (IEEE, 2011-07-31)
    This paper presents channel capacities of parallel and serial modulo-sum relay networks. A parallel relay network consists of one source, multiple relays in parallel, and one destination node. A serial relay network consists ...
  • Closed form of optimum cooperative distributed relay amplifying matrix 

    Lee, Kanghee; Yang, Jie; Kwon, Hyuck M.; Park, Hyuncheol; Lee, Yong H. (IEEE, 2014-05)
    This paper presents a closed form of an optimal cooperative amplify-and-forward (AF) relay amplifying matrix for a distributed relay network of M-source-M-destination pairs and N relays, called a cooperative distributed ...
  • Collision cones for quadric surfaces 

    Chakravarthy, Animesh; Ghose, Debasish (IEEE, 2011-12)
    The problem of collision prediction in dynamic environments appears in several diverse fields, which include robotics, air vehicles, underwater vehicles, and computer animation. In this paper, collision prediction of objects ...
  • Comments on "Distributed MMSE Relay Strategies for Wireless Sensor Networks" 

    Lee, Kanghee; Yang, Jie; Kwon, Hyuck M. (IEEE, 2014-07-15)
    Correction of a typographical error found in equation in the article “Distributed MMSE Relay Strategies for Wireless Sensor Networks.”
  • Comparative study of task allocation strategies in multirobot systems 

    Hatime, Hicham; Pendse, Ravi; Watkins, John Michael (IEEE-INST Electrical Electronics Engineers Inc, 2013-01)
    In this paper, we present a comparative study of three distributed strategies for task allocation in a multirobot system. The objective is to determine the course of action for each robot and the targets it needs to service. ...
  • Comparing and combining evolutionary couplings from interactions and commits 

    Bantelay, Fasil T.; Zanjani, Motahareh Bahrami; Kagdi, Huzefa Hatimbhai (IEEE, 2013)
    The paper presents an approach to mine evolutionary couplings from a combination of interaction (e.g., Mylyn) and commit (e.g., CVS) histories. These evolutionary couplings are expressed at the file and method levels of ...
  • Comparison of VOIP and VOATM for voice transmission 

    Bhagavathula, Ravi; Kamat, P.; Sehgal, M.; Pendse, Ravi (OPNETWORK 2001, 2001-08)
    The tremendous advances in the field of multi-service networking have enabled the integration of voice and data networks leading to a reduction in the overall network setup and maintenance costs. In this paper, an evaluation ...
  • Component reliability evaluation in the presence of smart monitoring 

    Heidari-Kapourchali, Mohammad; Aravinthan, Visvakumar (IEEE, 2013)
    Smart sensors and monitoring technologies are beginning to penetrate different levels of the power system. In a smart grid scenario, the operational condition of components needs to be reported to the control center, in ...
  • Constrained pole placement using projective controls technique 

    Fousan, N. S.; Sawan, M. Edwin (IEEE, 1990-05-23)
    Projective controls method is used to place the poles of a closed loop system within a circle in the left half plane. The design procedure is noniterative and the solution is obtained via linear quadratic (LQ) design for ...
  • Control traffic analysis of on-demand routing protocols in ad-hoc wireless networks 

    Mann, Raminder P.; Arbindi, Srividya; Namuduri, Kameswara; Pendse, Ravi (IEEE, 2005-09-28)
    This paper provides an analytical framework for estimating the routing overhead due to mobility and link breakage. Detailed analysis is presented for estimating the number of control packets (RREQ, RREP and RERR) as a ...
  • Control traffic balancing in software defined networks 

    Lin, Shih-Chun; Wang, Pu; Luo, Min (Elsevier, 2016-09-04)
    To promise on-line and adaptive traffic engineering in software defined networks (SDNs), the control messages, e.g., the first packet of every new flow and network traffic statistics, should be forwarded from software ...
  • Control-oriented modeling of ionic polymer-metal composite enabled hydrogen gas production 

    Nagpure, Tushar; Chen, Zheng (Elsevier Ltd., 2016-05-04)
    Ionic polymer-metal composite (IPMC) is an electro-active polymers which exhibits the property of ion migration under the application of external electric field. This property of IPMC along with the ability to operate in ...
  • Controlled electric vehicle charging for mitigating impacts on distribution assets 

    Aravinthan, Visvakumar; Jewell, Ward T. (IEEE, 2015-03)
    This paper proposes a two-step methodology for scheduling electric vehicle (EV) charging, which limits the burden on distribution and transmission assets while ensuring all the vehicles are charged. In the first step, the ...
  • Cooperative AF MIMO wireless relay networks under relay power constraint 

    Lee, Kanghee; Kwon, Hyuck M.; Kim, Hyunggi; Park, Hyuncheol; Lee, Yong H. (IEEE, 2012-11)
    This paper presents an amplify-and-forward (AF) relay scheme for M-source-M-destination pairs and N relay nodes. Cooperative minimum mean square error (MMSE) and zero-forcing (ZF) strategies for wireless relay networks ...
  • Cooperative AF wireless relay strategy under relay power constraint 

    Lee, Kanghee; Kwon, Hyuck M.; Sawan, M. Edwin; Park, Hyuncheol (IEEE, 2013-11)
    This paper presents an optimal relay amplifying matrix based on various schemes, such as zero-forcing (ZF) and minimum mean square error (MMSE), for a cooperative amplify-and-forward (AF) wireless relay network consisting ...
  • Cross-layer analysis of route discovery process and its impact on the packet end-to-end delay in wireless Ad Hoc networks 

    Kadiyala, Murali Krishna; Pendse, Ravi (IEEE, 2006-09-25)
    This paper presents a cross-layer analysis of the route discovery process in ad hoc networks, and discusses the impact of this process on the packet end-to-end delay. The analysis primarily highlights the role of medium ...
  • CSI-unaware scheduling for coexistence of MIMO-OFDMA device-to-device links and cellular mobile terminals 

    Mukherjee, Amitav; Xiong, Wenhao; Kwon, Hyuck M. (IEEE, 2015)
    In this paper, we examine scheduling methods for non-orthogonal resource sharing between device-to-device user equipments (D2D-UEs) and cellular user equipments (C-UEs) in a multi-carrier multi-antenna network. The cellular ...