Now showing items 411-430 of 1329

  • Electrical properties of recycled plastic nanocompsites produced by injection molding 

    Reddy, Rahul Jayarama; Asmatulu, Ramazan; Khan, Waseem Sabir (AMER SOC MECHANICAL ENGINEERS, 2012)
    Plastic recycling is a recovery process of waste plastics to make new products into different forms. Plastics are usually sorted based on their resin identification codes before the recycling and melting processes. Although ...
  • Electrochemical analysis of antibacterial polyelectrolyte-coated magnesium alloys for cardiovascular applications 

    Seraz, Md Syef (Wichita State University, 2013-05)
    This project involves two separate biomedical issues: corrosion rates of polyelectrolyte-coated magnesium (Mg) alloys, mainly used for biomedical purposes, and antibacterial properties of these alloys. Electrochemical ...
  • Electrodeposition of niobium on magnesium using green ionic liquids 

    Mahapatro, Anil; Hakim, Jehanzeb; Crane, Justen B.; Senthil Kumar, Siddarth (Electrochemical Society, 2013)
    In recent years magnesium (Mg) and its alloys are being increasingly investigated as alternatives to iron and aluminum to reduce the weight of structural materials in automotive applications. Relatively poor corrosion ...
  • Electroplating of iron on AZ31 magnesium alloy for coronary stent applications 

    Senthil Kumar, Siddarth (Wichita State University, 2014-05)
    This thesis is sequestered till May 2015.
  • Electrospun nanofiber based biosensor for ultrasensitive protein detection 

    Anwar, Md. Rajib (Wichita State University, 2011-07)
    This research attempted to develop “label-free” biosensor for the detection of cardiovascular risk biomarker, C-reactive protein (CRP). An electrospun Polystyrene (PS)/ Polyaniline (PANI) nanofiber was used as the sensing ...
  • EM-AODV: Metric based enhancement to AODV routing protocol 

    Thanthry, Nagaraja; Kaki, S.R.; Pendse, Ravi (IEEE, 2006-09-25)
    Needless to say the importance of mobile ad-hoc networks has been increasing everyday because of its infrastructure-less, decentralized nature. Performance of an ad-hoc network mainly depends upon factors like path selection ...
  • An empirical tool life equation for diamond interlocked tool based on delamination 

    Dhuttargaon, Mukund S. (2007-05)
    Though composites are commonly molded for achieving near net-shape, they have to undergo precise machining in order to achieve the dimensional stability and an interface quality. A complicated interaction between polymer ...
  • Emulation of a 1.5MW wind turbine with a DC motor 

    Hardy, Trevor David; Jewell, Ward T. (IEEE, 2011-07-24)
    In order to provide a testing environment for generator control strategies, a wind turbine emulator was developed. First, a mathematical model was developed for the a 1.5MW wind turbine generator based on available modeling ...
  • Emulation of a GE 1.5MW wind turbine with a DC motor 

    Hardy, Trevor David (Wichita State University, 2010-12)
    In order to provide a testing environment for generator control strategies, a wind turbine emulator was developed. First, a mathematical model was developed for a GE 1.5MW wind turbine generator based on modeling data ...
  • End-of-life analysis of advanced materials 

    Asmatulu, Eylem (Wichita State University, 2013-05)
    This dissertation has four major objectives: the first three ones are focused on the EOL of the advanced materials, while the fourth objective concerns the economic and environmental impacts of recycling aircraft materials. ...
  • Energy absorption characteristics of stitched corrugated sandwich panels 

    Mariyanna, Vivek B. (2005-12)
    The tailorability of composite sandwich structure with their strength- to- weight ratio interests in all field of crashworthiness application. An investigation of sandwich structure under static and high speed condition ...
  • Energy absorption of a car roof reinforced with a grid stiffened composite panel in the event of a rollover 

    Shenoy, Sudhir Shivaraya (Wichita State University, 2006-05)
    Rollovers tend to be very severe crashes because of the energy required to roll a vehicle over unlike front and side crashes. This study is an effort towards reducing the severity of a rollover crash by strengthening the ...
  • Energy analysis of manufacturing equipment in a production setting 

    Corcoran, Samantha L. (Wichita State University, 2010-08)
    Manufacturers are increasingly looking at ways to reduce operating costs through energy savings. While research has been done to identify energy usage throughout a facility--such as lighting, computers, heating and ...
  • Energy and spectrum-aware MAC protocol for perpetual wireless nanosensor networks in the Terahertz Band 

    Wang, Pu; Jornet, Josep Miquel; Abbas, Malik M.G.; Akkari, Nadine; Akyildiz, Ian F. (Elsevier, 2013-07-25)
    Wireless NanoSensor Networks (WNSNs), i.e., networks of nanoscale devices with unprecedented sensing capabilities, are the enabling technology of long-awaited applications such as advanced health monitoring systems or ...
  • Energy aware routing protocol (EARP) for ad-hoc wireless sensor networks 

    Mann, Raminder P.; Namuduri, Kameswara; Pendse, Ravi (IEEE, 2004-11-29)
    Wireless ad-hoc sensor networks differ from wireless ad-hoc networks from the following perspectives: greater energy constraint, light weight routing protocols, and flexible communication patterns. This paper proposes an ...
  • Energy consumption of VA hospital CT scans 

    Esmaeili, Mohammad Amin; Jahromi, Ashkan S.; Twomey, Janet M.; Yildirim, Mehmet Bayram; Overcash, Michael; Elsken, Tyson; Dominquez, Fernando; Thomas, Nicholas; Mcadam, Ashlee (IEEE, 2011-05)
    The United States healthcare spending was about $7,681 per resident and accounted for 16.2% of the nation's GDP in 2008 and rose to compromise about 18% of the nation's GDP by 2010. As healthcare sector continues to grow ...
  • Energy dependent analytical model for sustainable portable computing devices 

    Ghose, Toolika; Namboodiri, Vinod; Pendse, Ravi (IEEE, 2012-05)
    The rapidly growing demand for portable devices brings new challenges for the research community. A great amount of prior research has focused on battery-life constraints of such portable devices. A cloud based thin client ...
  • Energy implication of various VoIP codecs in portable devices 

    Pendse, Ravi; Naeem, Muhammad; Namboodiri, Vinod (IEEE, 2010-10-10)
    Current portable devices e.g. cell phones, PDA's and laptops are mainly Wi-Fi capable. Users can make efficient use of these devices by running various applications. Among these, the Voice over Internet Protocol (VoIP) ...
  • Energy implications of various VoIP codecs in portable devices 

    Naeem, Muhammad (Wichita State University, 2011-05)
    Today, most portable devices, e.g., cell phones, PDAs, and laptops are Wi-Fi capable. Users can make efficient use of these devices by running various applications, including Voice over Internet Protocol (VoIP) to make ...
  • Energy-aware routing protocol for Ad Hoc wireless sensor networks 

    Mann, Raminder P.; Namuduri, Kameswara; Pendse, Ravi (Hindawi Publishing Corporation, 2005-04-15)
    Wireless ad hoc sensor networks differ from wireless ad hoc networks from the following perspectives: low energy, lightweight routing protocols, and adaptive communication patterns. This paper proposes an energy-aware ...